a busy day as Clwb Hwylio Aberystwyth Boat Club is being formed so had to be at the boat for 1pm to meet Tom to discuss our plans.
when i arrived i couldn't open the lock despite it all spinning nice , so i had to break the lock retaining clip.
never mind a few rivits job done
task 2 was check my wood template was correct for switch box was it hell way too small
so in the end i put a piece on the side and waited for that to cure then i can fix the panel to it and custom do the rest.
then i did the rest of my blocks around the window this went better
next task was to use the 5 way wagos the way the wiring was done initially i removed alot but it all still seems long , i then tested each switch and nothing worked , so after tracing and starting again and tidying i add each circuit on separate. this worked
so now they are labelled as well, also added the led light above on the cabin roof , opposed to it being on the side , i cant move my solar controllers until the window is done
No comments:
Post a Comment