well the good weather did arrive so i got on with more work on the boat
tided the solar controller wiring and zip tied.
swapped the lead acid 12v 35ah batt for the ecoworthy 12v 100ah lipo
removed the original solar panel of cabin roof
removed a few loose window bolts and covered the holes with gaffa
removed redundant wire unknown and plugged the cab in cabin roof.
tidied cabin in general.
removed old battery connector for trolling motor prev owner used
removed other fittings associated
undid rear nav light to check bulb , it popped out never to be seen again, but one wire was off so put back on
checked ground chains on g3 for length to the wall
 |
| looking at G3 the gap |
 |
| rear nav light |
No comments:
Post a Comment